میکروفن RODE NT4
دسته بندی : محصولات استودیویی / میکروفن استودیوییتولید کننده : RODE
NT4 میکروفن استودیویی طراحی برند RODE و ساخت استرالیا می باشد .
این نوع میکروفن کاندنسور استریو X/y با زاویه 90 درجه کامل می باشد . اندازه دهانه دیافراگم کپسول های خارجی 2/2 اینچی با دیافراگم طلا اندود شده می باشد .دارای مبدل امپدانس الکترونیکی فعال JFET با بافر خروجی دو قطبی می باشد.
می توان گفت این میکروفن مناسب برای استفاده داخل استودیو و اجرا زنده است ، با طراحی دو منبع تغذیه 48 ولت و باتری 9 ولت قابل به راه اندازی و کار می باشد.به شما امکان استفاده از این میکروفن در جایی که منبع تغذیه دوربین و استودیو نباشد نیز قابل استفاده است .
این میکروفن به راحتی قابل حمل بوده و وزن آن با داشتن بدنه مستحکم ، با کمترین نویز ، مناسب برای ضبط دارام ، طبل ، خوانندگان ، گیتار و ضبط های محیطی مناسب است .
در این میکروفن دو کابل و خروجی طراحی شده یکی جک های 3.5 میلیمتری ، و دیگر جک خروجی XLR می باشد .که امکان اتصال به دوربین های حرفه ای DSLR و دیگر دستگاه های حرفه ای ذخیره صدا و میکسر های استریو را دارد .
کمپانی رود برای این میکروفن کیف مخصوص ضد ضربه و آب و دو کابل مخصوص فیش های 3.5و XLR ، و همچنین دو بادگیر ، و یک گیره پایه میکروفن می باشد .
- NT4 میکروفن استودیویی طراحی برند RODE و ساخت استرالیا .
- دامنه فرکانس 20Hz- 20kHz است .
- این نوع میکروفن کاندنسور استریو X/y با زاویه 90 درجه کامل می باشد.
- مبدل امپدانس الکترونیکی فعال JFET با بافر خروجی دو قطبی می باشد.
- دارای جک های 3.5 میلیمتری ، و دیگر جک خروجی XLR می باشد.
- کیف مخصوص ضد ضربه و آب و دو کابل مخصوص فیش های 3.5و XLR ، و همچنین دو بادگیر ، و یک گیره پایه میکروفن می باشد .
Features:
- Stereo XY Condenser Microphone
- 2 X Externally biased 1/2" Capsules with gold sputtered diaphragm
- Capsules closely matched with full frequency response
- Phantom power or 9V battery operation
- Durable satin-nickel finish
- Custom stereo cables included
- Custom WS4 twin-head Wind Shield
- Surface-mount transformerless circuitry
- Complete with Custom Carry Case and RM3 Stand Mount
- Stereo X/Y condenser microphone
- Dual externally biased 1/2” capsules with gold sputtered diaphragm
- Capsules closely matched with full frequency response
- Dual power operation
- Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable)
- Custom twin head windshield (WS4) included
- Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables
- Surface mount circuitry
- 10 year extended warranty when you register your microphone
The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone.
Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.
The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
NT4 Specifications
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | ![]() ![]() |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 143dBSPL |
Maximum Output Level | 13.9mV (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 16dBA |
Power Options | ![]() ![]() |
Weight | 480.00g |
Dimensions | 231.00mmH x 61.00mmW x 33.00mmD |
Output | ![]() ![]() |
Warranty | 1 year with free extension to 10 years following registration here |
نظری تا کنون ثبت نشده است.